Local Connection - Oce VarioLink 9522 User Manual

3
3.4.4

Local connection

When this machine is connected via a USB port, the printer driver can be installed with plug-and-play.
1
Connect the copier to a computer using a USB cable, and then start up the computer.
2
Turn on the main power of the copier.
– The Found New Hardware Wizard dialog box appears.
– If the Found New Hardware Wizard does not start up, turn off the copier, then on again. When
turning off the power, then on again, wait at least 10 seconds before turning it on again. Otherwise,
this machine may not function properly.
3
Insert the Driver CD into the CD-ROM drive of the computer.
4
Select "Search for a suitable driver for my device (recommended)", and then click the [Next].
5
Select "Specify location", and then click the [Next].
6
Specify the desired folder on the Driver CD or PS Driver CD that contains the printer driver, and then
click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
7
Click the [OK]. and follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue].
8
Click the [Finish].
9
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
3-20
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
VarioLink 9522 (Version 2)