Network Connection (Smb) - Oce VarioLink 9522 User Manual

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
14
Click the [Have Disk].
15
Click the [Browse].
16
Specify the desired folder on the Driver CD or PS Driver CD that contains the printer driver, and then
click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
17
Click the [OK].
The "Printer" list appears.
18
Click the [Next].
19
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue].
20
Click the [Finish].
21
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
22
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
3.4.2

Network connection (SMB)

When using the SMB printing, specify the port by specifying the printer during the printer driver installation
process.
TCP/IP setting for this machine
Specify the IP address in the TCP/IP Setting screen of this machine.
For details on specifying the IP address of this machine, refer to the User's Guide [POD Administrator's
Reference].
SMB setting for the copier
In "Print Setting" in the SMB Setting screen of the copier, specify the NetBIOS name, print service name, and
workgroup.
For details on the SMB settings of this machine, refer to the User's Guide [POD Administrator's Reference].
Printer driver installation using the Add Printer Wizard
0 The installation should be performed by a qualified system administrator or printer administrator.
1
Insert the Driver CD into the CD-ROM drive of the computer.
2
Click the [Start] button, point to "Settings", and then click "Printers".
3
Double-click "Add Printer".
– The Add Printer Wizard starts.
4
Click [Next].
5
In the dialog box for specifying the connection method, select "Local printer", and then click the [Next].
– Clear the "Automatically detect and install my Plug and Play printer" check box.
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select "Standard TCP/IP Port" for "Type of port:".
7
Click the [Next].
– The Add Standard TCP/IP Printer Port Wizard starts.
VarioLink 9522 (Version 2)
3
3-17