Connection - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide

11.1 Connection

To connect the patient camera to the Tandberg 880 MXP:
1.
Plug the DC/VBS cable to the back of the patient camera. Make sure the cable is
secure.
1 Power Indicator
2 Power Switch
3 Light Switch
4 White Balance Button
5 Focus Switch
6 Far
7 Near
8 Manual Iris Indicator
9 Iris Button
10 Manual Iris Dial
11 Y/C Port
12 LDC/VBS Port
13 Serial Number
2.
Plug in the other end of the DC/VBS cable and the power adaptor cord into the
AMD junction box as shown below:
3.
Connect one end of the S-Video cable to the AUX Input at the back of the codec.
Patient Camera
Page 20 of 31