Objectives; The Tandberg 880 Mxp - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide
1.0

OBJECTIVES

This user guide will provide you with an overview of the Tandberg 880 MXP and the
knowledge to setup and use the videoconferencing equipment.
Learning Outcomes:
After reviewing this guide, you should be able to:
1. Identify and explain the main parts of the Tandberg 880 MXP.
2. Use the remote control to navigate through the Tandberg 880 MXP menus, set
camera presets, and access additional video sources.
3. Setup and use the equipment.
2.0

THE TANDBERG 880 MXP

The main components of the Tandberg 880 MXP videoconferencing equipment are the
Camera, Codec, Ethernet Cable, Microphone, Screen/Monitor, Remote Control and S-
Video Cable Connector.
1. Camera - The built-in camera is a high quality imaging device which transmits
images to the screen/monitor. The camera movements are controlled by a wireless
infra red (IR) remote control that controls a variety of functions, both on the near and
far end.
2. Codec - The codec is the central part of the videoconferencing equipment. The main
task of the codec is the compression of outgoing video, audio and data, the
decompression of the incoming information and the transmission of this information
between endpoints. The name codec comes from a combination of the two words
compression and decompression.
THE EQUIPMENT AT A GLANCE
Page 3 of 31