Far End Presentation Through Lcd - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide
If the image does not display press the input button on the LCD to search for the
input or use the appropriate function key on your laptop (often F5, F8, or F10) to
send out the image.
3. Using a VGA/DVI cable, connect the VGA end to video output on the LCD
projector and then connect the DVI end to the PC DVI In on the back of the
codec
4. Press the Presentation button
PC image to the far site
5. Press the Presentation button again to return to your main camera image
10.1.1 Diagram
Codec

10.2 Far End Presentation Through LCD

This set up will allow you to display a presentation from a far end site through an LCD
projector onto a larger screen for easier viewing by the audience at your site.
To display a far end presentation on the LCD Projector:
1. Using an S-Video cable, connect one end to S-Video Out on the back of the
codec then connect the other end to a S-Video input on the LCD projector
2. You should now see the codec image through the LCD Projector.
on the remote control to display the
DVI In
VGA Out
VGA In
VGA Out
Page 16 of 31
LCD Projector
Laptop