The Log - Sony SDX-1100V/R User Manual

6.Command Specification
Page Code: The Page Code field identifies which log page is being requested by the initiator. If the page is not
supported then the command will terminate with a CHECK CONDITION status with the sense key set to ILLEGAL
REQUEST and an ASC of INVALID FIELD IN CDB.
Supported pages are:
Page Code
Parameter Pointer: The Parameter Pointer field allows the initiator to specify at which parameter within a log
page the requested data will begin.
For example if a page supported parameters 0 through 5, and the Parameter Pointer field contained 3 then only
parameters 3, 4 and 5 would be returned to the initiator. Similarly, if a page supported parameters 1, 3 and 6, and
the Parameter Pointer field contained 2, then only parameters 3 and 6 would be returned to the initiator.
Note that parameters within a page are always returned in ascending order according to parameter code. If an
invalid parameter pointer is sent the drive will return CHECK CONDITION with the sense key set to ILLEGAL
REQUEST and an ASC of INVALID FIELD IN CDB.
Allocation Length: The Allocation Length field is used to inform the target how much space the initiator has
allocated for data. Note however that if this field is 0 then this is not considered an error and the device will just
return a GOOD STATUS.
6.6.1. The Log Page Descriptor
The format of the log pages consists of ZERO or more variable-length parameter structures. Each page begins
with a 4-byte page header followed by ZERO or more variable-length parameter structures defined for that page.
The Log Select command supports the ability to send ZERO or more log pages. The LOG SENSE command
returns a single log page as specified in the Page Code field of the CDB.
6-14
Table 6-9: Supported Log Pages
00h Supported Log Pages
02h Write Error Counter Page
03h Read Error Counter Page
07h Last n Error Events Page
2Eh Tape Alert Log Page
30h Tape Log Page (Sony Unique)
31h Tape Capacity Log Page
33h Drive Usage Page (Sony Unique)
34h Write Frame Error Counter Page
35h Read Frame Error Counter Page
39h Data Compression Transfer Log Page
3Ch AIT Log Page
3Dh AIT Fixed Length Information Page for MIC
3Eh AIT Variable Length Information Page for MIC
Description
SONY AIT-5 drive SDX-1100V series Ver.1.0
LOG SENSE