Medium Auxiliary Memory Attribute Data; Attribute Format - Sony SDX-1100V/R User Manual

Ait-5
Table of Contents

Advertisement

12.APPENDIX E: Medium Auxiliary Memory Attribute
Attribute Type
Medium or Device
Host
Read and Write Attribute Commands:
The READ ATTRIBUTE (8Ch) and WRITE ATTRIBUTE (8Dh) commands will be implemented as follows.

12.4. MEDIUM AUXILIARY MEMORY ATTRIBUTE DATA

12.4.1. Attribute Format

Each medium auxiliary memory attribute will be communicated between the application client and drive in the
format shown in Table 12-3. This format will be used in the parameter data for the WRITE ATTRIBUTE command
and the READ ATTRIBUTE command. The attribute format in this standard implies nothing about the physical
representation of an attribute in the medium auxiliary memory.
Bit
7
Byte
0
(MSB)
1
2
READ
ONLY
3
(MSB)
4
5
(MSB)
N
The ATTRIBUTE IDENTIFIER field contains a code value identifying the attribute .
12-2
Table 12-2: MAM Attribute states
Attribute State
Description
Read Only
An application server may read the contents of the
attribute with the READ ATTRIBUTE command, but an
attempt to clear or change the attribute using the WRITE
ATTRIBUTE command will result in the command being
terminated with a CHECK CONDITION status. When the
READ ONLY bit is one, the attribute is in the read only
state.
Unsupported
The drive does not support the attribute and will not return
it in response to a READ ATTRIBUTE command.
Nonexistent
A host attribute does not exist in the medium auxiliary
memory until a WRITE ATTRIBUTE command creates it.
Read/Write
The attribute has been created using the WRITE
ATTRIBUTE command. After the attribute has been
created, the contents may be altered using subsequent
WRITE ATTRIBUTE commands. A read/write attribute
may be returned to be nonexistent state using a WRITE
ATTRIBUTE command with the attribute length set to
zero. When the READ ONLY bit is zero, the attribute is in
the read/write state.
Table 12-3: MAM ATTRIBUTE Format
6
5
ATTRIBUTE IDENTIFIER
Reserved
ATTRIBUTE LENGTH (n-4)
ATTRIBUTE VALUE
4
3
2
SONY AIT-5 drive SDX-1100V series Ver.1.0
1
0
(LSB)
FORMAT
(LSB)
(LSB)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdx-1100v

Table of Contents