Defined Loacations; Av Guide Mode; Day/Night Display; Close-Up Of Junction - Pioneer AVIC-X1 Operation Manual

This Trip :
Display tracking dots but erase them when the
navigation system is turned off (when turning off
the engine of your vehicle).
Off* :
Do not display tracking dots.

AV Guide Mode

Setting whether or not to switch to the navigation
screen automatically when your vehicle
approaches a guidance point such as an inter-
section while displaying a screen other than navi-
gation.
On* :
Switching from audio operation screen to naviga-
tion screen.
Off :
Screen is not switched.

Day/Night Display

To improve the visibility of the map during the
evening, you can change the combination of the
colours of the map.
Illuminated* :
You can change the combination of the colours
of a map according to whether the vehicle lights
are On or Off.
Daytime :
The map is always displayed with bright colours.

Close-up of Junction

This setting enables to switch to an enlarged
map around the point where your vehicle is
approaching an intersection, entrance/exit of
motorway, or a junction.
On* :
Display switches to an enlarged map.
Off :
Does not switch to an enlarged map.

Arrow in AV

Set whether to display the guidance information
by arrow on the Audio Operation screen.
On* :
Display guidance information by arrow on the
Audio Operation screen.
Off :
Do not display guidance information by arrow on
the Audio Operation screen.
56

Defined Loacations

Touch "Defined Loacations" in the Setting
Menu to display.

Set "Home"

➲ Registering and changing your home location
➞ Page 41

Map In Memory

The memory area is the area in the map, which is
being read in advance for the memory navi mode.
There are two ways of setting the memory area.
Around Current Position
An approximately 17 km (10.6 mile) square on a
side with the selected location at the centre is
read into the memory.
Indicate the map you want to store in the memory
by touching , , or
scale to the one you desire, and touch "OK".
Continuously touching
to rapidly scroll the map screen.Restrictions
apply to the distances that can be saved.
Around Current Route
Sets the the surrounding currently set route to
the memory area. The route to the destination will
appear on screen. Please press "OK".
❒ If the route is not set, "Around current
Route" cannot be set.
❒ The extent of the information that can be set
in the memory area is about 10.6 km (6.6 mi)
surrounding the route.

Set "Go To"

➲ Registering and changing your favourite loca-
tion ➞ Page 41
. Then, adjust the map
, , or allows you