Memory Navi Mode; Navigation In The Memory Navi Mode - Pioneer AVIC-X1 Operation Manual

Memory Navi Mode

While the map disc is inserted, you can store the
data on the map disc into the memory of the nav-
igation unit. If the map disc is removed from the
navigation unit after the data is stored, navigation
is performed using the data in the memory
(memory navi mode). In the memory navi mode,
you can play a music CD or DVD-Video on the
navigation unit while navigation is taking place.
The operation is automatically switched to the
memory navi mode when the map disc is
removed from the navigation unit.
Navigation in the memory navi
mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared with navigation using the map disc (DVD
navi mode). These function buttons, which can-
not be used in the memory navi mode, are indi-
cated in light grey. If you want to use these
functions, please insert the map disc again. In
addition, you may need to insert the map disc
and store new data in the memory during naviga-
tion operation, such as when the destination is
far away.
The memory navi mode uses the following map
data to perform navigation.
The following are collectively known as Memory
Data:
• Manually downloaded memory area data in the
"Map In Memory" of the Settings menu (Man-
ual downloaded Memory Area)
• Automatically downloaded memory data of the
surrounding areas during the route search
(Auto downloaded Memory Area)
➲ Setting of the memory area ➞ Page 56
What is manual downloaded memory
area?
Memory area is the area of the map data, which
the user voluntarily read into the memory for the
memory navi mode. Normal guidance is available
if the memory area is registered and you drive
within the stored area.
What is auto downloaded memory
area?
This is the zone around the route in the map area
that is automatically stored in the memory when
the route is set. When the route distance is 120
km (74.5 mi) or shorter, a zone with a width of
approximately 17.5 km (10.9 mi) around the route
is stored. When the route distance is longer than
120 km, a zone with a width of approximately 10.6
km (6.6 mi) around the route is recorded. These
data are transmitted to the memory as you set
the route. When a new route is entered, the mem-
orised data are deleted.
The data read into the memory will not be deleted
even when the vehicle's engine is turned off.
The memorised area may be deleted in the follow-
ing circumstances:
• Yellow lead of the navigation system or the
vehicle battery is disconnected.
• RESET button is pressed.
• Software is updated.
Navigation operation during the mem-
ory navi mode
• ✓ :operation possible
"
• :operation restricted
• – :operation not possible
Main menu
Destination menu
Address Search
Return Home
Go to
POI Search
Vicinity Search
Address Book
Destination History
Motorway Search
Postal Code Search
Cancel Route
Traffic/Info menu
All Traffic
Traffic On Route
Overlay POI
Traffic Settings
Manual Station Search
Route Options menu
Edit Current Route
View Current Route
Recalculate
Route No.
–
–
–
–
–
–
–
–
–
✓
–
–
–
✓
✓
–
"
–
✓
107