Problems In The Audio Screen (Common); Problems In The Audio Screen (During Dvd-Video Playback) - Pioneer AVIC-X1 Operation Manual

Problems in the audio screen (common)

Symptom
Playback is not possible.
There's no picture.
There's audio and video skipping.
Rear display picture disappears.
Nothing is displayed and the touch
panel keys cannot use.

Problems in the audio screen (during DVD-Video playback)

Symptom
No sounds are heard.
The volume level will not rise.
The icon is displayed,
operation is not possible.
The picture stops (pauses) and the
unit cannot be operated.
The picture is stretched, the aspect is
incorrect.
Playback is not possible.
A parental lock message is displayed
and playback is not possible.
Parental lock cannot be cancelled.
Cause
The disc is dirty.
The loaded disc is a type this unit
cannot play.
Non compatible video system disc is
loaded.
The handbrake cord is not con-
nected.
The handbrake is not applied.
This unit is not firmly secured.
• The source disc being listened to
with the navigation system has
been ejected.
• The REAR button was pressed and
REAR ON mode switched off.
• There was a problem with the rear
display or a faulty wiring connec-
tion, for example.
• Rear View is selected on the
screen.
• When the gearstick is in [R], dis-
plays rear view camera images.
(When "NAVI" is selected in
REAR DISP menu.)
The setting for the rear view camera
is incorrect.
The gearstick was placed in [R] when
the rear view camera was not con-
nected.
Cause
Cables are not connected correctly.
The unit is performing still, slow
motion or frame-by-frame playback.
"dts" is selected for the DVD-Video
disc sound track.
and The operation is prohibited for the
disc.
The operation is not compatible with
the disc's configuration.
Reading of data has become impos-
sible during playback.
The aspect setting is incorrect for the
display.
The loaded disc has a different
region number from this unit.
Parental lock is on.
The code number is incorrect.
You have forgotten your code
number.
Action (See)
➞
Clean disc. ( "Hardware Manual")
Check what type the disc is.
Change to a disc compatible to your
video system.
Connect a handbrake cord, and
apply the handbrake.
Connect a handbrake cord, and
apply the handbrake.
Secure this unit firmly.
• Before ejecting the disc, switch the
source. This problem may occur
when certain connection methods
are used.
• Press the REAR button to turn
REAR ON mode on.
• Check the rear display and its con-
nection.
• Select view mode other than Rear
View.
• Move the gearstick other than turn
[R] position. (Select SOURCE in
REAR DISP menu.)
Connect a rear view camera cor-
rectly.
Press NAVI/AV button to return to
the source display and then select
the correct setting for CAMERA.
➲ About CAMERA setting
Page 94
Action (See)
Connect the cables correctly.
There is no sound during still, slow
motion or frame-by-frame playback.
Switch to a non "dts" sound track.
This operation is not possible.
This operation is not possible.
After touching once, start play-
back once more.
Select the appropriate setting for
➞
your display. ( "Hardware Manual")
Replace the disc with one featuring
the same region number as this unit.
➞
( "Hardware Manual")
Turn parental lock off or change the
➞
level. ( Page 91)
Input the correct code number. (
Page 91
)
Touch "CLEAR" 10 times to cancel
➞
the code number. ( Page 91)
➞
➞
117