Deleting A Way Point From The Route; Adding And Deleting Way Points Using The Route Options; Registering Poi Shortcuts - Pioneer AVIC-X1 Operation Manual

4
Touch "Yes".
A new route to your destination through all
the remaining way points, except for the
skipped way point, is calculated.
Deleting a way point from the
route
If you no longer need to pass through a way point
you have not yet reached, you can delete that
place from the list of way points and calculate a
new route.
1
Touch "Destination" in the Main menu,
then touch "Cancel Route".
A message asking whether you want to can-
cel the route appears.
2
Touch "Yes (one)".
3
Touch the way point you want to delete.
❒ If you want to delete other way points,
touch "Delete" and repeat step 3 above.
4
Touch "Done".
A new route to your destination via the
remaining way points is calculated.
❒ You can also cancel the route using the
Chg.Route in the shortcut menu.
Adding and deleting way points
using the Route Options
1
Touch "Route Options" in the Main menu,
and then touch "Edit Current Route".
This displays a screen for adding or deleting
way points. The method is the same as
described in "Adding a way point" and "Delet-
ing a way point from the route".
❒ "Edit Current Route" is displayed only when
the route is set.
➲ "Adding a way point" and "Deleting a way
point from the route" ➞ Page 37
38

Registering POI shortcuts

You can register up to six shortcuts to your
favourite points of interest (POI).
1
Touch "Destination" in the Main menu,
and then touch "Vicinity Search".
2
Touch "Set".
Displays a list of already registered POI short-
cuts.
Four POI shortcuts are registered as the
default setting: Restaurants, Petrol Station,
Hotel and Airport.
3
Touch "Add".
Displays a POI category list.
4
Touch category or
Touching category adds that category to the
shortcuts. After touching
to Step 5 and select a subcategory.
5
Touch subcategory.
The selected category is added to the list of
POI.
When registering another icon, repeat steps 3
through 5.
6
Touch "Back"
The registered shortcut is displayed.
.
, please proceed