Messages And How To React To Them - Pioneer AVIC-X1 Operation Manual

Symptom
Dialogue language (and subtitle lan-
guage) cannot be switched.
No subtitles are displayed.
Playback is not with the audio lan-
guage and subtitle language settings
selected in DVD SETUP.
Switching the viewing angle is not
possible.
The picture is extremely unclear/dis-
torted and dark during playback.

Messages and how to react to them

The following messages may be displayed by your Navigation System.
❒ There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Message
Please insert the appropriate disc.
This is not the appropriate disc.
Please insert the appropriate disc.
Irregular speed pulse signal is
detected. Please turn system power
off and check the installation. After
checking, please re-boot the system
and press "OK".
Speed pulse wire is not connected.
Please be sure to connect the system
to the speed pulse wire. Accuracy is
not fully ensured without speed
pulse.
Vibration is detected. Please turn
system power off and check the
installation. After checking, please
re-boot the system and press "OK".
118
Cause
The DVD playing does not feature
multiple language recordings.
You can only switch between items
indicated in the disc menu.
The DVD playing does not feature
subtitles.
You can only switch between items
indicated in the disc menu.
The DVD playing does not feature
dialogue or subtitles in the language
selected in DVD SETUP.
The DVD playing does not feature
scenes shot from multiple angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
The disc features a signal to prohibit
copying. (Some discs may have this.)
When
•If you try to use a disc which is
incompatible with this system.
•If you insert a disc upside down.
•If the disc is dirty.
•If the disc is cracked or otherwise
damaged.
If the Navigation unit does not
receive the vehicle speed pulse.
The speed signal input (pink lead
wire) of the power cable is not con-
nected.
While the vehicle is stationary, the
Navigation System is installed in a
place where the navigation unit may
be affected by a large vibration.
Action (See)
You cannot switch among multiple
languages if they aren't recorded on
the disc.
Switch using the disc menu.
Subtitles are not displayed if they are
not recorded on the disc.
Switch using the disc menu.
Switching to a selected language is
not possible if the language selected
in DVD SETUP is not recorded on the
disc.
You cannot switch between multiple
angles if the DVD does not feature
scenes recorded from multiple
angles.
Switch between multiple angles
when watching scenes recorded
from multiple angles.
Since this unit is compatible with the
copy guard analog copy protect sys-
tem, when playing a disc that has a
signal prohibiting copying, the pic-
ture may suffer from horizontal
stripes or other imperfections when
viewed on some displays. This does
not mean this unit is malfunctioning.
What to do
•Insert a suitable disc.
•Insert the disc with the label
upward.
•Clean the disc.
•Insert a normal, round disc.
Consult your Pioneer dealer.
To operate with 3D hybrid mode, con-
nect the speed signal input (pink
lead wire) of the power cable cor-
rectly.
Although it can be operated with
Simple hybrid mode without con-
necting the speed signal input, the
precision of the positioning will be
less accurate.
Re-install the navigation unit of the
Navigation System in a place where
the navigation unit will not be
affected by vibration.