Pioneer AVIC-X1 Operation Manual page 27

City Map
In certain metropolitan city areas, a more
detailed "City Map" is available at the 50 m (0.05
mi) map scale or lower.
(1)
(2)
(4)
(12)
(9) (5)
❒ Detailed city map is not displayed during the
memory navi mode.
❒ Except when on a motorway, if you are driving
by an area where a City Map is available at the
100 m (0.1 mi) map scale, a message appears
informing you that you have entered a city
map area.
Display items
Guidance point*
The next guidance point (next turning point, etc.)
is shown by a yellow flag.
Destination*
The chequered flag indicates your destination.
(1) Name of the next street to be used*
(2) Distance to the guidance point*
Touch to access the next information.
(3) Current location
The current location of your vehicle. The tip of the
triangular mark indicates your heading and the
display moves automatically as you drive.
(4) Distance to the destination (or distance
to way point)*
If way points are set, the display changes with
each touch. When two or more way points are
set, the distance to the destination and the dis-
tance to the next way point are switched.
(5) Name of the street your vehicle is travel-
ling along (or City Name, etc.)
(6) Compass
The red arrow indicates north. If the scale of the
onscreen map is less than 50 km (25 mi), touch-
ing the map changes the direction it is displayed
in (north up/heading up). When the scale of the
(11) (8)
map is not less than 50 km (25 mi), it is fixed to
"north up".
(7)
Heading up
The map display always shows the vehicle's
direction as proceeding toward the top of the
screen.
North up
The map display always has north at the top of
(3) (6)
the screen.
(7) Zoom in/Zoom out
Touch to change the map's scale.
➲ Changing the map's scale ➞ Page 26
(8) Map scale
The scale of the map is indicated by distance.
Except for on the Vehicle Dynamics Display,
the scale of the map is displayed at the top right
of the screen.
➲ Changing the map's scale ➞ Page 26
(9) VOICE icon
Touch to change to voice recognition mode.
❒ This is displayed only when the microphone
➲ The voice operation of the navigation system
(10) TMC icon
When a route has been calculated, touch to
check whether there is any traffic jam or closure
information on your route. When no route has
been calculated, touch to display the traffic list.
(11) Current time
(12) Estimated time of arrival (or travel time
to your destination)*
The display changes with each touch.
The estimated time of arrival is automatically cal-
culated from the Average Speed set and the
actual average speed.
➲ How to set average speed ➞ Page 54
(13) Tracking mark
The tracking mark shows the route your vehicle
has travelled.
➲ Select the tracking setting ➞ Page 55
for voice recognition is connected.
➞ Chapter 9
25