➲ Deleting a way point from the route ➞
Page 38
No :
Returns to the previous display without delet-
ing the route.
❒ You can also cancel the route using the
Chg.Route in the shortcut menu.
Adding Way Points to the Cur-
rent Route
You can select way points (locations you want to
visit on the way to your destination) and you can
recalculate the route to pass through these loca-
tions.
Adding a way point
You can add up to five way points. This is
achieved as follows :
1
Specify the location you want to visit.
Specify a way point in the same way as speci-
fying a destination.
At completion of the location search, a mes-
sage is displayed asking whether or not to set
that specified location as the destination, or
as a pass-through location.
2
Touch "Way Point".
3
Confirm the contents of the list, and touch
"Done".
❒ You can see the way point by touching the
on the right of the list.
Route calculation with the specified location
as a way point starts when you touch "Done".
On this display, you can select the following
items:
Add :
Switch the display to search for points. When
you display the map of a certain point after
searching for it, you can touch "OK" to add
that point to the way points. (You can add up
to five way points in total.)
Delete :
You can delete way points from the list.
Sort :
Touch to display a screen listing the way
points.
Automatic :
You can sort the destination and way points
automatically. The system will show the near-
est way point (distance in a straight line) from
the current location as way point 1, and sort
the other points (including your destination)
in order of distance from the one before.
Original :
Returns to the original order.
Select either "Automatic" or "Original" and
touch "Done" to start the route search.
Touching
or
can sort the way points manually.
❒ If you set a way point(s) in the route to your
destination, the route up to the next way
point will appear light green. The rest of
the route will be light blue.
Skipping a way point
If the points are set, the next way point along the
route can be skipped.
1
Touch the map screen.
The Shortcut menu appears.
2
Touch
.
The Route/Detour menu appears.
3
Touch "Skip Way Point".
A message asking whether you want to skip
the next way point appears.
on the left of the list, you
37