Error Messages; Route Setting Information; Route Search Specifications - Pioneer AVIC-X1 Operation Manual

Dvd map
Hide thumbs Also See for AVIC-X1:
Table of Contents

Advertisement

Error Messages

When problems occur with disc playback, an error message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action. If the error persists, contact
your dealer or your nearest PIONEER Service Centre.
The messages in "( )" will appear on the sub-display.
Message
Error-02
(ERROR-20, ERROR-
21, ERROR-22)
Error-05-82
(ERROR-50)
DIFFERENT REGION
DISC (REGION ERR)
NON PLAYABLE DISC
(NON-PLAY)
THERMAL PROTEC-
TION IN MOTION
(TEMP)

Route Setting Information

Route search specifications

Your Navigation System sets a route to your desti-
nation by applying certain built-in rules to the
map data. This section provides some useful
information about how a route is set.
• When a route is calculated, the route and
voice guidance for the route is automati-
cally set. Also, for day or time traffic regu-
lations, only information about traffic
regulations at the time when the route was
calculated is shown. One-way streets and
street closures may not be taken into con-
sideration. For example, if a street is open
during the morning only, but you arrive
later, it would be against the traffic regula-
tions so you cannot drive along the set
route. When driving, please follow the
actual traffic signs. Also, the system may
not know some traffic regulations.
• Upgrade Navigation DVDs are available
for purchase from your local Pioneer
dealer that includes the most current map
and point of interest information. Contact
your local Pioneer dealer for details.
122
Cause
Dirty
Scratched disc
The disc is loaded upside down
Electrical or mechanical
The disc does not have the same region
number as this unit
This type of disc cannot be played by this
unit
The temperature of this unit is outside of
the normal operating range
Action (See)
Clean disc.
Replace disc.
Check that the disc is loaded correctly.
Press RESET button. ("Hardware manual"
and refer to page 114 in this manual.)
Replace the DVD-Video with one bearing the
correct region number.
Replace the disc with one this unit can play.
Wait until the unit's temperature returns to
within normal operating limits.
About the route condition
When the calculation of only one route is set, you
can search a route option by combining the fol-
lowing conditions.
➲ How to set the calculation conditions ➞
Page 33
For example, when "Fast" and "Avoid Motor-
way" ("On") are combined, the route, which
avoids motorway, and has the shortest travel
time, will be calculated and displayed on the
screen.
Condition 1 :whether to put priority on the
distance, or time
Short :
Calculate a route with the shortest distance to
your destination as a priority.
Fast :
Calculate a route with the shortest travel time to
your destination as a priority.
Condition 2 :whether to use motorway or not
Avoid Motorway :
Calculate a route that avoids motorway. (A route
using the motorway may be set if your destina-
tion is far away.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-x1rCndv-50mt

Table of Contents