Setting The Announcement Select Mode - Alpine CVA-1014R Owner's Manual

DAB Operation (Optional)
MUTE/
TITLE
SETUP
g g g f f f
g g f f TUNE/
A.ME
Setting the Announcement Select
Mode
1
Press TA/ANNC. for at least 2 seconds to turn
ON the Announcement Select mode.
2
Press g or f to select "ANNOUN," and
then press TUNE/A.ME to set it to ON.
3
After turning ON the "ANNOUN," press g or
f to select your desired Announcement.
ANNOUN (Announcement)
ALLSEL (All Select)
TRAFFIC (Traffic News)
TRAVEL (Travel News)
WARNING (Warning)
NEWS (News)
WEATHER (Weather)
EVENT (Event)
SPECIAL (Special Event)
RA INFO (Radio Info)
SPORT N (Sports News)
FINANCE (Financial)
4
Press TUNE/A.ME to set ON/OFF for the
selected Announcement.
Repeat Steps 3 and 4 to set more.
18
-EN
Preset 4 TA/
ANNC.
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
5
To set the Announcement Select mode OFF,
press and hold TA/ANNC. for at least 2 seconds.
NOTES
• When one of the selections between ALLSEL (All
Select) and FINANCE (Financial news) is set ON, no
announcement interrupts are made if you set OFF for
the ANNOUN (Announcement).
• If you set ON/OFF with the ALLSEL (All Select)
selection, you can set ON/OFF for the selections from
TRAFFIC (Traffic News) to FINANCE (Financial
news).
• The ON/OFF setting of TRAFFIC (Traffic News) is
reflected in the setting of the "Turning ON/OFF
Traffic News Announcement" section on page 17.
TIPS
• When an urgent broadcast is received, the mode
automatically changes to the DAB mode to receive the
Alarm Announcement. If you adjust the volume level
at this time, that volume level is memorized, and that
volume level is applied the next time you receive an
urgent broadcast.
• If the announcement that you select in Step 3
interrupts, the selected announcement Label is
displayed. If you adjust the volume level at this time,
that volume level is memorized, and that volume level
is applied the next time announcement interrupts.