Controlling Cd Changer; Playing Mp3 Files With The Cd Changer - Alpine CVA-1014R Owner's Manual

CD/MP3/Changer Operation (Optional)
SOURCE/ BAND/ MUTE/
POWER TEL. SETUP
g f -/J

Controlling CD Changer

An optional 6-disc or 12-disc CD Changer may be
connected to the CVA-1014R/CVA-1014RB/CVA-
1014RR if it is Ai-NET compatible. With a CD
Changer connected to the Ai-NET input of the
CVA-1014R/CVA-1014RB/CVA-1014RR, the CD
Changer will be controllable from the CVA-1014R/
CVA-1014RB/CVA-1014RR.
Using the KCA-400C (the Multi-Changer
Switching device) or the KCA-410C (Versatile Link
Terminal) multiple changers can be controlled by
the CVA-1014R/CVA-1014RB/CVA-1014RR.
See the Multi-Changer Selection section on page
25 for selecting the CD Changers.
NOTE
The controls on the CVA-1014R/CVA-1014RB/CVA-
1014RR for CD Changer operation are operative only
when a CD Changer is connected.
1
Press SOURCE/POWER to activate the CD
changer mode. The display shows the disc
number and track number.
NOTES
• The source indicator varies depending on the
connected source.
• Press BAND/TEL. to switch the Disc mode in the CD/
Changer mode.
24
-EN
Preset 6
Disc select buttons
(1 through 6)
2
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CD player.
For details, please see this section.
• When the "FUNC" indicator is lit in red in the
monitor, or is lit in the sub-display, the disc select
buttons become nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the
procedure is the same as for the 6-disc CD
Changer. To select discs numbered from 7 to 12,
first press the FUNC button. In the sub-display,
this changes the "D" indicator to "d." The "FUNC"
indicator is lit in yellow on the monitor. Then
press the desired disc select button. With FUNC
activated, the disc select buttons 1 to 6 will
represent discs 7 to 12 respectively.
Playing MP3 Files with the CD
Changer
If you connect a changer compatible with MP3,
you can play CD-ROMs, CD-Rs, and CD-RWs
containing MP3 files.
1
Press SOURCE/POWER to switch to the CD
Changer mode.
Disc number, Folder Number, File Number and
Elapsed Time are displayed.
2
Press any one of the disc select buttons (1
through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press -/J.
Pressing -/J again will resume playback.