Sound (Beep) Guide Function; Demonstration - Alpine IVX-C806 Owner's Manual

Other Useful Features
1 2 3
(IVX-C806)
SOURCE

Sound (Beep) Guide Function

This function will give audible feedback with
varying tones depending upon the button
pressed.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
Press the SOURCE button.
The main menu appears on the display.
2
Press the 6 (SETUP) button.
The Setup mode screen appears.
3
Rotate the rotary encoder and select "BEEP."
The Function Guide is displayed.
4
Press the 2 (ON) button to activate the Sound
Guide mode. The display shows "BEEP ON."
Press the 1 (OFF) button to deactivate the
Sound Guide mode. The sound guide beep will
not be produced when a button on the unit is
pressed.
5
When the setting has been completed, press the
FUNC (RETURN) button.
The display returns to the main menu screen.
48
-EN
OPEN/CLOSE
5 6
Rotary encoder
1 2 3
FUNC
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)

Demonstration

In the Demonstration mode, the unit performs
scanning of the basic operation of each source.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
Press the SOURCE button.
The main menu appears on the display.
2
Press the 6 (SETUP) button.
The Setup mode screen appears.
3
Rotate the rotary encoder and select "DEMO" to
activate the Demonstration Selection mode.
The display shows the Function Guide screen.
4
Press the 2 (ON) button to activate the
Demonstration mode. When the Demonstration
mode is activated, the unit automatically starts
the demonstration (simulation). The
demonstration continues until the demonstration
mode is deactivated.
To deactivate the demonstration mode, press the
1 (OFF) button. The demonstration stops.
OPEN/CLOSE
5 6
Rotary encoder
FUNC
SOURCE