Adjusting Time-Correction For 2-Way Speaker System - Alpine IVX-C806 Owner's Manual

Audio Processor Operation (Optional)
(IVX-C806)
Function buttons
(1 through 6)
3
Adjusting Time-Correction for
2-Way Speaker System
Use this procedure to adjust the sound time
difference between the speakers.
1
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
2
Press the 3 (T-CORR.) button.
The mode changes to the Time Correction
Adjustment mode.
3
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way divider is connected:
L-Low
R-High/R R-High/L
When two 2-way dividers are connected:
L-Low R-Low
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
L-Low R-Low
When only one 3-way divider is connected:
L-Low R-Low L-Mid
36
-EN
4 6
FUNC
SOURCE Rotary encoder
R-Low F-High/L
F-High/R
L-High R-High
L-High R-High
R-Mid L-High R-High
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
Function buttons
(1 through 6)
3 4 6
When two 3-way dividers are connected:
L-Low R-Low L-Mid
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
L-Low R-Low L-Mid
4
Rotate the rotary encoder clockwise or
counterclockwise to adjust the time correction
value upward or downward respectively.
5
When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode screen.
FUNC
SOURCE
Rotary encoder
R-Mid L-High R-High
R-Mid L-High R-High