Receiving Traffic Information; Pty (Programme Type) Tuning - Alpine IVX-C806 Owner's Manual

Receiving Traffic Information

1
Press the RDS button.
The display changes to the RDS setting screen.
2
Press the 4 (T.INFO) button to turn on the
Traffic Information mode.
3
Press the FUNC (RETURN) or RDS button to
return to the radio mode screen.
4
Press the 1 (g) or 3 (f) button and
select the desired traffic information station.
When the traffic information station is tuned in,
the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "Traffic Info."
When traffic information broadcast is over, the
unit will automatically set in the standby mode.
NOTES
If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode
for 1 minute. If the signal remains below a certain
level for over 70 seconds, the "TP OFF" indicator
appears in the display.
If you do not want to listen to the traffic information
being received, lightly press the 4 (T.INFO) button to
skip that traffic information message. The T. INFO
mode will remain in the ON position to receive the
next traffic information message.
If the volume level is changed while receiving traffic
information, the changed volume level will be
memorized. When traffic information is received next
time, the volume level will be automatically adjusted
to the level memorized.

PTY (Programme Type) Tuning

1
Press the RDS button. The display changes to
the RDS Setting Screen.
2
Press the 5 (PTY) button to activate the PTY
mode. The Programme Type of the station being
currently received will be displayed for 5
seconds.
NOTE
If no button is pressed within 5 seconds after pressing the
5 (PTY) button, the PTY mode will be automatically
cancelled.
3
Press the 1 (; BACK) or 2 (NEXT :) button
within 5 seconds after activating the PTY mode
to choose the desired programme type while
"PTY" (programme type) is being displayed.
Each press scrolls the programme type by one.
4
Press the 5 (PTY) button within 5 seconds after
selecting the programme type to start searching
for a station in the selected programme type.
If no station is found, "NO PTY" will be displayed.
5
Press the FUNC (RETURN) button to return to
the radio mode screen.
15
-EN