Switching Phase; Setting The External Device Interrupt Mode - Alpine IVX-C806 Owner's Manual

Switching Phase

Use the phase-switching function after connecting
your audio-processor, amplifier and subwoofer to
the IVX-C806/IVX-M706/CVA-1006R.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
Press the SOURCE button.
The main menu appears on the display.
2
Press the 6 (SETUP) button.
The Setup mode screen is displayed.
3
Rotate the rotary encoder and select "Sub Wf."
The Function Guide is displayed.
4
Press the 2 (0°) or 3 (180°) button to switch
the phase of the subwoofer output.
To turn off this function, press the 1 (OFF)
button.
5
When setting has been completed, press the
FUNC (RETURN) button.
The display returns to the main menu screen.
Setting the External Device
Interrupt Mode
If an Alpine Ai-NET Interrupt Box (NVE-K200) is
connected to the IVX-C806/IVX-M706/CVA-1006R,
an Auxiliary Source will be allowed to interrupt the
current audio source. For example, you can listen
to the voice guidance of your navigation system
when it occurs even while you are playing a CD or
MD. The CD/MD player will be automatically muted
during voice guidance. For further details, please
refer to the manual for NVE-K200.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
Press the SOURCE button.
The main menu screen appears on the display.
2
Press the 6 (SETUP) button.
The Setup mode screen appears on the display.
3
Rotate the rotary encoder and select "IN-INT
MUTE" from the Setup mode screen. The
Function Guide appears on the display.
4
Press the 1 (OFF) button to turn off the mute
mode.
In the mute OFF mode:
The volume level can be adjusted in the
interrupt mode.
NOTE
When the mute ON mode is selected, sound will not
produce.
5
When your setting has been completed, press
the FUNC (RETURN) button.
The display returns to the main menu.
NOTE
The Auxiliary device being connected, must have an
Interrupt wire with a positive trigger, for this function to
operate automatically. Otherwise, a separate switch
needs to be added to switch manually.
43
-EN