Adjusting Levels - Alpine IVX-C806 Owner's Manual

6
Press the rotary encoder and select the channel
that you wish to adjust.
Each press changes the channel as follows.
When only one 2-way divider is connected:
Low
When two 2-way dividers are connected:
Low
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
Low
When only one 3-way divider is connected:
Low Mid-L
When two 3-way dividers are connected:
Low Mid-L
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment, and the
display also changes.
Low Mid-L
7
Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
8
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the Divider mode screen.
F-High R-High
High
High
Mid-H High
Mid-H High
Mid-H High

Adjusting Levels

1
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
2
Press the 2 (LEVEL) button. The mode changes
to the Level Adjustment mode.
3
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way system divider is
connected:
L-Low
R-High/R R-High/L
When two 2-way system dividers are
connected:
L-Low R-Low
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment, and Rear adjustment modes,
and the display also changes.
L-Low R-Low
When only one 3-way divider is connected:
L-Low R-Low L-Mid
When two 3-way dividers are connected:
L-Low R-Low L-Mid
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
L-Low R-Low L-Mid
4
Rotate the rotary encoder clockwise or
counterclockwise to adjust to your desired level
upward or downward respectively.
5
When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode.
R-Low F-High/L
F-High/R
L-High R-High
L-High R-High
R-Mid L-High R-High
R-Mid L-High R-High
R-Mid L-High R-High
35
-EN