Audio Processor Operation (Optional); Selecting Factory (Maker's) Equalization - Alpine IVX-C806 Owner's Manual

Audio Processor Operation (Optional)

(IVX-C806)
Function buttons
(1 through 6)
Selecting Factory (Maker's)
Equalization Presets
If an optional Alpine Equalizer is connected to the
IVX-C806/IVX-M706/CVA-1006R, the Equalizer
can be controlled from the IVX-C806/IVX-M706/
CVA-1006R.
Six equalization curves are preset on the
Equalizer at the factory.
1
Press the SOURCE button.
The main menu screen appears on the display.
2
Press the 4 (A.PROC) button to display the list
of the Audio Processors (A.PROC).
3
Rotate the rotary encoder and select "Equalizer."
Then press the rotary encoder to execute the
selection.
The display changes to the Equalizer mode
screen.
4
Select a desired Equalizer characteristic curve
and press the corresponding Function button
(1 (FLAT) through 6 (NEWS)).
You can select your desired equalizer
characteristic curve from 6 preset characteristic
curves; FLAT, MALE, FEMALE, POPS, ROCK
and NEWS.
5
When you have selected your desired
characteristic curve, press the FUNC (RETURN).
The display returns to the Audio Processor List
screen.
4
FUNC
SOURCE Rotary encoder
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
Function buttons
(1 through 6)
4
FUNC
Rotary encoder
NOTE
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
Tip
In the equalizer mode, for example, you can horizontally
scroll each of the mode screens by rotating the rotary
encoder to the left or right. You can also adjust the
volume level by pressing and rotating the rotary encoder
(DHE, Surround, BBE, listening position, time collection
mode main screen only).
SOURCE
29
-EN