Alpine F1 Status CDA-7990R Owner's Manual page 46

4
Rotate the MODE (Audio Control) knob to select
the desired letter/numeral/symbol available for
naming. ("A" for example).
5
Press the MODE (Audio Control) button to store
the first character. The first character will stop
blinking and the display will automatically ad-
vance to the next character. When that character
begins to blink, you may choose the next letter or
symbol of your title.
A [
6
Repeat the steps 3 and 5 above to complete the
titling. Pressing the MODE (Audio Control) button
after entering the 12th character, automatically
stores the title into memory.
When entering a title of less than 12 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Press the
TITLE button to record the title.
The title memory number will be displayed for
about 2 seconds.
For example :
ME 1 1 5
Number of titles
memorized
7
Press the TITLE button to end the title display
mode.
A ]
0
Memory capacity
• The memory capacity for the disc
title is up to 150 including the
built-in CD and CD-changer. If
you try to store beyond the limit,
the display will show "FULL
DATA." At this point, no more
titles can be stored.
• To input a new title, one of the
previously inputted titles must
first be deleted.
• When you want to erase a title,
enter the " " symbol into all
spaces.
43
-
EN