Pty (Programme Type) Tuning - Alpine F1 Status CDA-7990R Owner's Manual

PTY (Programme Type) Tuning

1
Press the FUNC button to light the function
indicator in red and set the Function mode to ON.
2
Press the PTY button to activate the PTY mode.
The Programme Type of the station being cur-
rently received will be displayed for 5 seconds.
• If there is no receivable PTY broadcast, "NO
PTY" will be displayed for 5 seconds.
• If no RDS station can be received, the display
shows "NO PTY."
3
Press the DN or
seconds after activating the PTY mode to choose
the desired programme type while the PTY
(programme type) is being displayed. Each press
scrolls the programme type by one.
LIGHT M CLASSICS
4
Press the PTY button within 5 seconds after
selecting the programme type to start searching
for a station in the selected programme type.
The chosen programme type indicator blinks
during searching and lights when a station is
found.
If no station is found, "NO PTY" will be displayed
for 5 seconds.
5
To set the Function mode to OFF, press the
FUNC button again.
UP buttons within 5
OTHER M
• If no button is pressed within 5
seconds after pressing the PTY
button, the PTY mode will be
automatically cancelled.
31
-
EN