Manual Storing Of Station Presets - Alpine F1 Status CDA-7990R Owner's Manual

Radio Operation
A. ME
BAND
Manual Storing of Station
Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the " P "
(Preset) on the display blinks.
F 3 8
P
3
Press the Preset button into which you wish to
store the station while the " P " (Preset) display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a " P " and station frequency
memorized.
F 3 8 9 .
P 1
24
-
EN
SOURCE
9 . 5 5
5 5
Preset buttons
1~6
FUNC
Function indicator
• Perform the preset selection after
confirming if the function
indicator lights in green.
Press the FUNC button to turn
the function indicator to green
when function indicator lights in
red or turns off.