Automatic Memory Of Station Presets - Alpine F1 Status CDA-7990R Owner's Manual

4
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the proce-
dure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW and LW).
Automatic Memory of Station
Presets
1
Press the SOURCE button to select the radio
mode.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
3
Press and hold the A. ME button for at least 2
seconds.
The frequency on the display continues to change
while Automatic Memory is in progress. The tuner
will automatically seek and store the 6 strongest
stations into the selected band.
They will be stored into presets 1 to 6 in order of
signal strength.
When Automatic Memory has been completed,
the tuner goes to the station stored in Preset No. 1.
• If you store a station in a preset
memory which already has a
station, the current station will be
cleared and replaced with the
new station.
• If no stations are stored, the tuner
will return to the original station
you were listening to before the
auto memory procedure began.
25
-
EN