THOMSON SpeedTouch 545 Setup And User Manual page 67

System Password
E-DOC-CTC-20030814-0001 v1.0
•
Back up the current SpeedTouch™ configuration, restore the SpeedTouch™
default configuration, or upload a backup configuration file:
•
To backup the current configuration click Backup and follow the instructions.
•
To restore the SpeedTouch™ defaults:
Click Restore default to load the default configuration.
1
The SpeedTouch™ prompts you to confirm the reset to defaults.
2
Click Yes to load the default configuration
The SpeedTouch™ is now in its default configuration.
3
•
To upload and apply a SpeedTouch™ backup configuration file:
Click Browse to locate the backup file on your local disk you intend to
1
restore. Select the file and click OK.
Click Upload to upload and apply the backup configuration.
2
Once uploaded, the SpeedTouch™ asks you to confirm that you want
3
the SpeedTouch™ to effectively apply the uploaded configuration.
Click Accept to save the new configuration.
C
lick this link to display the System Password page.
This page allows you to configure a system password to restrict access to the Speed-
Touch™:
It is highly recommended to configure a system password, to protect the Speed-
Touch™. Make sure however not to use an obvious password such as your name, date
of birth, etc.
Enter User id and Password (maximum 16 characters) of your choice and re-enter your
password in the appropriate field. Click Apply to apply the System password and
to save your changes to persistent memory.
As long as no system password is supplied, a warning is displayed on the
Note
SpeedTouch™ web pages.
5 SpeedTouch™ Web Interface
Save all
65