Setting Up The Speedtouch - THOMSON SpeedTouch 545 Setup And User Manual

1.2 Setting Up the SpeedTouch™

Wall mounting
assembly
SpeedTouch™ variants
ADSL service
Connect the DSL line
Connect the power
supply
E-DOC-CTC-20030814-0001 v1.0
Part of the package is a wall mounting assembly which allows you to conveniently mount
the SpeedTouch™ on a wall. See
for more information.
Two ADSL variants of the SpeedTouch™ exist:
•
The ADSL/POTS variant connecting to an analog Plain Old Telephone Service
(POTS) line
•
The ADSL/ISDN variant connecting to a digital Integrated Services Digital
Network (ISDN) line
You can identify your variant by checking the identification label located on the bottom
of your SpeedTouch™.
Use only the SpeedTouch™ variant which is appropriate for the DSL service provided
to your premises. Check with your Service Provider to determine whether your Speed-
Touch™ is adapted to ADSL service requirements.
The appropriate DSL service must be available at your premises:
•
ADSL service must be enabled on your telephone line.
•
As both telephone and ADSL service are simultaneously available from the same
copper pair, you will need a central splitter or distributed filters for decoupling
ADSL and telephone signals.
Always contact your Service Provider when installing splitters/filters!
Public telephone lines carry voltages that can cause electric shock. Only install splitter/
filters yourself if these are qualified for that purpose.
The DSL port on the SpeedTouch™ is marked "Line".
Use the DSL cable provided to wire the SpeedTouch™ DSL port to your telephone wall
outlet or distributed filter.
Always check first whether the power supply adapter provided is suitable for the local
power specifications. Contact your Service Provider in case of any doubt.
The power inlet on the SpeedTouch™ is marked "AC".
Plug the adapter's coaxial jack into the SpeedTouch™'s power inlet and plug the power
supply into a power socket outlet.
1 SpeedTouch™ Installation
"7.2 Using the Wall Mounting Assembly" on page 76
9