THOMSON SpeedTouch 545 Setup And User Manual page 37

Starting a broadband
Internet session
Terminating a
broadband Internet
session
E-DOC-CTC-20030814-0001 v1.0
Proceed as follows:
Click the Internet Connect dockling.
1
If the Internet Connect dockling is not available, go to the Applications
Note
folder on the system startup disk and double-click Internet Connect.
The following window appears:
2
Make sure Built-in Ethernet is selected in the Configuration list.
If needed, enter user name and password for your user account at the Service
3
Provider.
Click Connect.
4
As soon as the connection is established you can open your web browser and surf the
Internet.
Proceed as follows:
Click the Internet Connect dockling.
1
If the Internet Connect dockling is not available, go to the Applications
Note
folder on the system startup disk and double-click Internet Connect.
The following window appears:
2
Make sure Built-in Ethernet is selected in the Configuration list
Click Disconnect.
3
The connection is released. As a result no Internet connectivity exists anymore.
2 SpeedTouch™ Internet Connectivity
35