Choosing A Printer - Axis 5600+ User Manual

AXIS 5600+ User's Manual

Choosing a Printer

Selecting a Printer
Note:
LaserWriter 7.0
Printer Driver
The method for choosing a printer varies depending on which version
of LaserWriter printer driver you are using.
• The LaserWriter 7.0 driver assumes that you use a standard
PostScript driver, and cannot take advantage of any printer
specific features.
• The LaserWriter 8.0 driver uses PPD files that contain printer
descriptions. This gives you full control over any features your
printer might have.
The print server can automatically detect the type of printer you
are using if you enable the 'Autodetect Printer Type'-function.
The print server can then recognize two types of printers, besides
the default LaserWriter printer: EpsonLQ2 and DeskWriter. To
enable the 'Autodetect Printer Type'-function, log in to your
print server's web interface and choose: Admin | Network
Settings | Detailed View | Macintosh | AutoDetectPrinterType |
YES. See the print server's web interface Help pages for details.
Follow the instructions below to choose a printer:
1. Select Chooser from the Apple menu.
2. Click the LaserWriter icon.
3. If your network has more than one zone, click on the zone you
want. If your network has no zones, this box does not appear.
4. Click the name of the printer you want. The default AXIS 5600+
printer names are shown as: AXIS<nnnnnn>_<port>, where
<nnnnnn> is the last six digits of the AXIS 5600+ serial number,
and <port> is LPT1, LPT2 and COM1 respectively. For example:
AXIS100086_LPT1.
5. Click the Close box. This completes the configuration and closes
the Chooser.
Section 7: Setting Up - Macintosh
75