Section 8 Setting Up - Unix; Installation In The Unix Environment - Axis 5600+ User Manual

Section 8: Setting Up - UNIX
80

Section 8 Setting Up - UNIX

Installation in the UNIX Environment

Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 23 and onwards, you are now able to
print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 5600+ into your
host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 5600+ and can
be downloaded to your host using FTP, so no disks are required. The
axinstall script can also be downloaded from the Axis
Communicationws web site http://www.axis.com/ and on the AXIS
Product CD.
Having completed this operation, the printer connected to the AXIS
5600+ will appear as though they are directly connected to the host
printer spooler.
If you intend to operate your AXIS 5600+ in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 5 Setting Up - NetWare, on page 54
Section 4 Setting Up - Windows, on page 34
Section 6 Setting Up - OS/2, on page 68
Section 7 Setting Up - Macintosh, on page 74
AXIS 5600+ User's Manual