Table of Contents
Advertisement
User's Manual
--- TCP/IP MENU
TCP_ENB.
: YES
INT_ADDR.
: 0 0 0 0
DEF_ROUT.
: 0 0 0 0
NET_MASK.
: 0 0 0 0
LPD_BANN.
: OFF (OFF, AUTO, LAST)
DHCP_ENB.
: YES
BOOTP_ENB.
: YES
RARP_ENB.
: YES
DNS_ENB.
: YES
DNS_ADDR1.
: 0 0 0 0
DNS_ADDR2.
: 0 0 0 0
DOMAIN_NAME.
:
SLP_SCOPE_LIST.: DEFAULT
RTN_OPT.
: NO
RTEL_PR1.
: 0
---
SNMP MENU
READ_COM.
: public
WRT_COM.
: pass
TRAPADDR.
: 0 0 0 0
TRAP_COM.
: public
SYS_NAME.
:
SNMP_AUT.
: DISABLE
TRAP_PRT.
: DISABLE
---
IPX MENU
FR_802_3.
: YES
FR_ETH_2.
: YES
FR_802_2.
: YES
FR_SNAP.
: YES
---
NetBIOS/NetBEUI MENU
LSLM_ENB.
: YES
NB_FR_TYPE.
: FR_AUTO (FR_AUTO, FR_802_2, FR_DIX)
LPRINT_1.
: AX100086.LP1
--- LPT1 Menu
L1_CENTR.
: HISPEED (IBM_PC, STNDRD, FAST, HISPEED)
L1_BSYTM.
: 60
L1_COMMENT.
:
(DISABLE, ENABLE)
(DISABLE, ENABLE)
Appendix B: The Parameter List
TCP/IP Enabled
Internet Address
Default Router Address
(0.0.0.0 for no router)
Net Mask
(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
LPD Banner Page Mode
DHCP Enabled
BOOTP Enabled
RARP Enabled
DNS Enabled
Primary DNS Server Address
Secondary DNS Server Address
Domain Name (Defines the domain to which the AXIS OfficeBasic
belongs)
Defines the SLP scope to which the AXIS OfficeBasic belongs.
Reverse Telnet Options Enabled
PR1 Reverse Telnet Port Number
Read Community
Read/Write Community
Trap Address
Trap Community
System Name
Authentication Failure Trap
Printer Failure Trap
IEEE 802.3 Frame Type Enabled
Ethernet II Frame Type Enabled
IEEE 802.2 Frame Type Enabled
SNAP Frame Type Enabled
NetBIOS/NetBEUI Enabled
NetBIOS Frame Type (Requires Restart)
Name Printer 1 (100086 are the last six characters of the serial number)
Centronics Interface Timing LPT1
Busy Status Time-Out LPT1
(All status reporting disabled if set to 0)
Optional user comment describing the printer at LPT1
2
Advertisement
Table of Contents
