Axis 16852 User Manual page 13

User's Manual
Assign an IP Address
to the Print Server
Important:
Section 2: Hardware Installation and IP address assignment
If you have a DHCP server on your network, your print server
•
will receive an IP address automatically. The IP address will then
appear on the test page you printed above.
If you are not working in a DHCP network, you need to set the
•
IP address of the print server manually. Choose from the
methods listed in the table below:
Notes
Ethernet Address:
You need to know the Ethernet address of your print server in
order to assign an IP address to it.
The Ethernet address is based upon the serial number of your print
server.
This means, for example, that a print server with the serial number
of 00408C100086, will have the corresponding Ethernet address
of 00 40 8C 10 00 86.
The serial number is located on the backside label of the print
server.
IP Address:
Unless you are assigning an IP address using DHCP, you must
obtain an unused IP address from your network administrator.
DO NOT use the IP addresses used in the following examples when
installing your print server. Consult your network administrator
before assigning an IP address to your print server.
If you need more specifications for DHCP networks, see WINS,
DDNS, DHCP information for System Administrators, on page
49
13