Axis 16852 User Manual page 39

User's Manual
Installing
AXIS Print Monitor
on your client
Section 5: Printing from Windows NT 3.5 (NetBIOS/NetBEUI)
Follow the instructions below to install AXIS Print Monitor on your
Windows client:
1. Insert the AXIS OfficeBasic CD in your CD-drive. When the
AXIS OfficeBasic CD user interface has started, click the
Install Software button.
2. Click the NetBIOS/NetBEUI printing link that is located
under the Windows NT 3.5x header.
3. Select AXIS Print Monitor and click the Install link. Save the
Setup.exe file and double-click it to start the AXIS Print
Monitor Installation Wizard. Click Next> when the installation
starts.
4. Select the destination directory where AXIS Print Monitor will
be installed. If you want to change the recommended default
directory, you should use the Browse... button to navigate to
the desired directory. Click Next>.
5. Select the Start menu group. If you want to change the default
value, you can select a group from the list or type a new group
name in the appropriate field. Click Next>.
6. The last page of the installation lists all your selections. If you
want to change any of your selections, just click the the <Back
button until you reach the desired page. Click Install> to finish
the installation.
39