Axis 16852 User Manual page 16

Section 2: Hardware Installation and IP address assignment
16
arp -s 192.168.3.191 00-40-8c-10-00-86
ping -t 192.168.3.191
2. Without interrupting the "ping -t" loop, restart the print server
by disconnecting and then re-connecting the power supply.
3. If the host returns Reply from 192.168.3.191 ...
or a similar message, the IP address has been set successfully.
Interrupt the "ping -t" loop by pressing CTRL+C on your
keyboard.
If the host returns Request time out...
you need to perform a factory default on the print server and
perform steps 1-3 above again. See Factory Default, on page 52.
4. Log in to the print server's Web pages (see ), select Admin |
Network Settings | Detailed View | TCP/IP and define the
Default Router and Subnet Mask.
You have now set the IP address of the print server. Continue to
Adding a Network Printer to your workstation, on page 19.
User's Manual