Axis 16852 User Manual page 17

User's Manual
Set the IP Address
using AXIS IP
JumpStarter
Section 2: Hardware Installation and IP address assignment
AXIS IP JumpStarter is Windows 95/98/NT/2000 software that
allows you to assign IP addresses to your Axis servers and find Axis
servers on your network.
Print server firmware 6.15 and above is required.
1. Download and install AXIS IP JumpStarter. AXIS IP JumpStarter is
available on www.axis.com.
2. Select a print server from the serial number list:
3. From the Server menu, select Set IP Address. The Set IP Address
dialog appears.
4. Click the radio button that corresponds to your choice of IP
setting method (static or dynamic using DHCP).
When assigning a static IP address you also have to define
Subnet Mask and Default Gateway.
5. Click OK to save your settings.
6. Enter the server root password (by default set to pass), click OK
and the print server will appear in the list with the assigned IP
address.
7. To verify that you have access to the print server's Web pages,
highlight the print server in the list and select Server Home Page
from the Server menu.
8. You have now finished the procedure of setting the IP address.
Continue to Adding a Network Printer to your workstation, on
page 19.
17