Axis 16852 User Manual page 25

User's Manual
Adding NetBIOS/NetBEUI Printers in Windows NT 4 using AXIS Print Monitor
Section 3: Printing from Windows 95/98/NT4/2000/XP
7. Click Next, choose an appropriate driver and finish the installation
in the normal manner.
See to it that the NetBEUI protocol is installed on your client. Follow
the procedure below to install Axis Printer Ports from a Windows NT
4.0 workstation:
1. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon.
2. The Wizard asks you to select My Computer or Network printer
server. Select My Computer, click Next.
3. Click Add Port... In the Available Ports dialog, select AXIS Port and
click New Port...
4. Select NetBIOS/NetBEUI as your choice of network protocol and
click OK.
5. Select the AXIS Port you want to add from the list of available ports.
The port appears as <name>.<port>: LP1
(Example: AX100086.LP1)
Click OK.
6. Close the Printer Ports window.
7. Click the Configure Port... button. Choose whether error condition
pop-up messages are to be displayed by checking the box in the
Configure Axis Ports dialog. Define the frequency at which the error
messages should be displayed after retry. Click OK. Continue the
installation by clicking Next.
8. Choose the appropriate printer driver for your printer. Click Next
and proceed directly to step 11. It is only necessary to perform steps
9 - 10 if your printer does not appear in the list.
25