Controlling The Effect Send Level - Generalmusic WK1000 Owner's Manual

owners manual
The appropriate effect (Reverb or Chorus) effect can be set to each Performance track independently.
REVSEND
CHOSEND
Select the track you wish to modify, using the function buttons
1
Note: the Performance or Single Touch mode must not be selected
The selected track will blink in the display, and the assigned sound name will be
shown in the 8-digit area
2 Press the PAGE button to enter the track edit page.
Press the PAGE button repeatedly until you get to the REVSEND or CHO-
3
SEND page
The current effect value is shown in the display (range 00-15)
4 Modify the value using the TEMPO/DATA buttons
5 Press ESCAPE to exit
Press the STORE PERFORMANCE button for a few seconds and confi rm with
6
ENTER to save the changes to the current Performance
Note: selecting another Performance (or recalling the current one), before saving the
changes, the Performance will be restored to the previously changed settings.
Page52

CONTROLLING THE EFFECT SEND LEVEL

Controls the REVERB level in each Performance track
Controls the CHORUS level in each Perforrmance track
wk1000
DRUMS BASS ACC. 1 ACC. 2 ACC. 3 CHORD LOWER UPPER 2 UPPER 1
PAGE PAGE
PAGE
PAGE PAGE
CURSOR
PAGE
CURSOR
the digital signal processor