Generalmusic WK1000 Owner's Manual page 38

owners manual
WK1 can process the sounds thanks to two built-in multieffect devices that affect the
sections independently. It is possible to set the effect processor to active (Led ON) or non
active (Led OFF) mode.
To modify Reverb or the Chorus and their Send, keep the REV/CHO key pressed for at
least one second. The parameter that can be modifi ed starts blinking.
The Multieffect page will appear on the LCD display.
Use the CURSOR key to move among the various parameters. When each effect
is displayed, the relative general volume is indicated.
Use the TEMPO/DATA buttons to modify the effects.
Page32
REV/CHO
wk1000
PAGE
REV:HALL 2 VOL=100
CHO:CHO2 2 VOL=100
PAGE
CURSOR CURSOR
Styles