Recalling A Style From A Performance - Generalmusic WK1000 Owner's Manual

Arranger keyboard

Hide thumbs

Table Of Contents

Table of Contents

owners manual

If you wish to change the Sound assigned to one or more tracks, check

ﬁ rst the PERF menu funcion IS NOT selected and the S.T. PLAY function

is OFF, then press the corresponding function key (F1/F9) to enable the

track, that will start blinking in the display.

When the track binks in the display the sound can be changed using the

keypad

Using the TEMPO/DATA buttons it's possible to modify the track volume

level.

Press START / STOP to start the Style

This operation may be also performed while a Style is playing. In this case

the new Style selected will start on the successive beat.

Each Performance contains a Style that can be recalled at any time. Press

and hold down the STORE PERFORMANCE button for a few seconds. When

the ("?") message appears in the display conﬁ rm with ENTER. The cur-

rent panel conﬁ guration, including the active Variation and Tempo will be

stored to the Performance.Therefore it is possible to recall a Style (and the

relative Variation/Tempo) by selecting a Performance, provided that the

STYLE LOCK function is not active.

Disable STYLE LOCK if it's ON (the display indicator to must be OFF)

Enter the perfomance mode pressing the PERFORMANCE RECALL button

The name of the ﬁ rst Performance in the ﬁ rst group and the name of the

current group (es. P11: GranPNO) will appear in the display. Each func-

tion key selects one of the 9 Performances of the selected group.

Use the PAGE e PAGE or the +/ – buttons in the numeric keypad to

change performance group (7 groups are available) .

Use the TEMPO/DATA buttons to control the Tempo speed. Recalling a Per-

formance automatically disables the SINGLE TOUCH PLAY function and

restores wk1000 to the default status of the Performance. If the TEMPO

LOCK function is disabled, the Tempo is also updated.

Press the START/STOP button to play the Style

Styles

CURSOR