The Arranger Section; Arranger On/Off; Lower Memory; The Tempo Speed - Generalmusic WK1000 Owner's Manual

Arranger keyboard

Hide thumbs

Table Of Contents

Table of Contents

owners manual

This section contains the buttons to enable the style functions.

Enabling ARRANGE ON/OFF is on (LED on), all the accompaniment tracks are

activated to play. If this button is OFF, only the Drum track will play after the

start.

Enabling the LOWER MEMORY function (the display led is ON), the notes

played in the right hand section of the keyoard will keep on playing even if the

left hand is raised. When the function is OFF, the sound in the Lower keyboard

section will end as the left hand is raised. The Lower memory function is useful

to hold "pad" sounds without using a Damper Pedal, which may be of more

use for the right-hand section of the keyboard.

The two balance keys for ACCOMP and KEYBOARD function are a shortcut to

balance the realtime and the arranger sections performing levels.

The Tempo speed of a Style can be changed using the TEMPO/DATA buttons

either before starting or during a Style, regardless of the TEMPO LOCK sta-

tus.

(IMPORTANT: In some operating situations the same functions control other pa-

rameter. For example, TEMPO/DATA button control the volume of a blinking

track.

The current Tempo can be stored to a Performance, and be ready for new settings. To recap, it is

possible:

To select a Style with Single Touch Play active and recall the original Style tempo from the ROM

Recall a Performance where a user programmed Tempo was stored

To ﬁ x a Tempo that can not be changed (using the TEMPO LOCK function).

The TEMPO LOCK function locks the current Style Tempo allowing you to recall

Styles without changing the Tempo, regardless of the status of the Single Touch

Play button. Nevertheless, it is always possible to change the Tempo in real

time using the TEMPO/DATA button. The activation of TEMPO LOCK is shown

in the display with the alternate ﬂ ashing of the Tempo setting and the word

"LOC". When TEMPO LOCK is ON, the Tempo setting remains ﬁ xed for all

subsequent Style and Performance selections. When TEMPO LOCK is OFF, the

selection of a Style or a Performance recalls the memorised Tempo setting.

SAVING TEMPO SPEED DATA IN A PERFORMANCE

Follow these instructions to save the Tempo speed data in a Performance

Select the Performance where you wish to save the new Tempo setting

Use the TEMPO/DATA buttons to set the new Tempo speed

Press and hold the STORE PERFORMANCE button for a few seconds

Press ENTER to conﬁ rm the request shown in the display [?]

The save operation can also be carried out while the Style is playing.

Page28