Sounds Selection; Mode To Recall Sounds - Generalmusic WK1000 Owner's Manual

owners manual
A Recall the desired Sound in the Real Time keyboard section
1 Press the SOUNDS button on the panel
Digit the corresponding SOUND number using the keypad
2
B Recall Performance containing a sounds combinations
C
Recalling a SINGLE TOUCH PLAY setting using the 9 Function buttons (F1/F9).
To assign a Sound to a keyboard section (Upper 1, Upper 2, Lower)
Select fi rst the section where you want to selec the sound: UPPER
1
1, UPPER 2, LOWER, using the relative buttons.
The arrowhead moves immediately to the selected section, while
the assigned Sound blinks in the display.
2 Enter the Sound number with the numeric keypad
To select a Sound whose number is greater than 99, fi rst press the
100+ key, then enter the two remaining digits. (For example, tak-
ing the Sound table on the top right of the control panel as a refer-
ence, select Sound No. 100 BRIGHTNESS: fi rst press the +100 key,
then enter 0 twice in the SOUND keypad).
3 Play the keyboard using the new sound
Repeat the operation to change the sound of another section. The
Sound shown in the display is always the one assigned to the sec-
tion indicated by the right arrowhead.
wk1000 sound database is arranged in SOUND BANKS. The BANKS
can be selected pressing the +/- buttons on the numeric keypad, at
one time.
Banks 1,2 each 3 contain 128 sounds (Sounds from Bank 1 are Gen-
eral MIDI compatible); Bank 4 features 60 more Sounds that can be
played back by selection Bank 4 and using the +/- buttons from the
right numeric keypad to scroll over its contents. Banks 1, 2 and 3 are
GMX compatible (GMX is an extended General Midi standard created
by Generalmusic).
wk1000 Drumkits are in Banks 2, 3 and 4 (#112-119), 20 drumkits are available (their drum maps are in the
owners manual Appendix) to the . Bank 4 offers an extra Drumkit (DrumSFX). To assign a Drumkit to one of the
keyboard sections, proceed as explained to select a Sound. Make sure that BANK 2 or BANK 3 are selected,
then enter the Drumkit number (112-119). The current Bank number is shown by the numbered indicators, in
the bottom right hand corner in the display.
Page20

SOUNDS SELECTION

MODE TO RECALL SOUNDS

SELECTING SOUND BANKS
1
4
7
-
UPPER 1 UPPER 1
UPPER 2
UPPER 2
1
2 3 +100 +100
4 5 6
7 8 9
-
0 +
1
4
7
-
DISPLAY BANK
sounds and performances
wk1000
2 3 +100 +100
5 6
8 9
0 +
LOWER LOWER
2 3
+100 +100
5 6
1
8 9
0 +
2
1 2 3
+100
4 5 6
INDICATOR
1 2
7 8 9
3
4
- 0 +