Set Date And Time - Lexmark 131 User Manual

Understanding printer menus
Menu item
Layout
Auto
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Index Print
Quality
Normal
Draft
Fine
Paper Source
MP Feeder
Tray <x>
Manual Paper

Set Date and Time

Menu item
View Date/Time
Set Date/Time
Yes
No
Description
Determines the maximum number of images that can print on one side of paper
Notes:
•
Auto is the factory default setting.
•
If both the printer and the PictBridge‑enabled camera have a value for this
setting, the value in the camera supersedes the value in the printer.
Determines which resolution, toner darkness, and color saver values the device uses
when printing photos sent from a PictBridge‑enabled device
Notes:
•
Normal is the factory default setting.
•
If both the printer and the PictBridge‑enabled camera have a value for this
setting, the value in the camera supersedes the value in the printer.
Identifies the printer default input source when printing photos from a
PictBridge‑enabled device
Notes:
•
MP Feeder is the factory default setting.
•
A photo size larger than the size of the media installed in the printer input
source cannot be selected.
Description
Displays the time in YYYY‑MM‑DD HH:MM format
Note: This is a view only screen.
Instructs the printer to run the setup wizard
Notes:
•
Yes is the factory default setting.
•
After completing the setup wizard by selecting Done at the Country/Region
select screen, the default becomes No.
159