Network Card Menu; Tcp/Ip Menu - Lexmark W850 User Manual

Understanding printer menus
Menu item
Print Setup Page
Print NetWare Setup
Page

Network Card menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Network Card
Menu item
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0‑225 seconds
Banner Page
Off
On

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > TCP/IP
Description
Prints a report containing information about the current network setup
Notes:
•
The Setup Page contains information about the network printer settings, such as the
TCP/IP address.
•
The NetWare Setup Page menu item appears only on models that support NetWare and
shows information about NetWare settings.
Description
Lets you view the connection status of the Network Card
Lets you view the speed of a currently active network card
Lets you view the network addresses
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
•
90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
Allows the printer to print a banner page
Note: Off is the factory default setting.
92