Installing Optional Trays - Lexmark W850 User Manual

Additional printer setup

Installing optional trays

The printer supports the following optional input sources:
•
2 Tray Module (two 500‑sheet trays)
•
2,000‑sheet dual input trays
• 2,000‑sheet high capacity feeder
•
Duplex unit
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are installing an optional tray after setting up the printer, then turn the
printer off and unplug the power cord, the USB cable, and the Ethernet cable before continuing.
1
Unpack the optional tray, and remove all packing material.
2
Place the tray in the location chosen for the printer.
Note: If you are installing more than one optional tray, the 2,000‑sheet dual input trays must always be installed
as the first optional trays (configuring from the bottom up).
Note: The optional 500‑sheet trays and optional 2,000‑sheet dual input trays are interchangeable.
1 Tray 3 and Tray 4 (500-sheet trays or 2,000-sheet dual input trays)
2 Tray 1 and Tray 2 (500-sheet trays)
3 Tray 5 (2,000-sheet high capacity feeder)
4 Duplex unit
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
4
4
3
3
1
1
2
2
25