Modem Selection; Dialing Properties - Toshiba Tecra A7 User Manual

Hide thumbs Also See for Tecra A7:
Table of Contents

Advertisement

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.

Dialing Properties

Select this item to display the dialing properties.
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.
Connecting
To connect the internal modem cable, follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a CD-RW/DVD-ROM drive or HDD
connected to a 16-bit PC card, you might experience the following modem
problems:
Modem speed is slow or communication is interrupted.
Skips may occur in sound.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
User's Manual
Modem Jack
Connecting the internal modem
Operating Basics
Telephone Jack
4-21

Advertisement

Table of Contents
loading

Table of Contents