Modem Selection; Dialing Properties; Connecting - Toshiba TECRA M3 User Manual

Open dialog box, if the modem and Telephony Current
Location region code do not match.
A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.

Dialing Properties

Select this item to display the dialing properties.
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.

Connecting

To connect the modular cable, follow the steps below.
The modular cable that comes with the computer must be used to connect
a modem. Connect the end of the modular cable with the core to the
computer.
■
In case of a lightning storm, unplug the modular cable from the
telephone jack.
■
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the computer's modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is
connected.
User's Manual
Modem jack
Figure 4-12 Connecting the internal modem
Modular cable Telephone jack
Operating Basics
4-25