Toshiba Tecra A7 User Manual page 163

When installing Wireless LAN cards, the channel configuration is managed
as follows:
■
For wireless clients that operate in a Wireless LAN infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■
For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
■
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel(printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
User's Manual
Frequency Range
Channel ID
Wireless IEEE 802.11 Channels Sets (11G Turbo Mode)
Frequency Range
Channel ID
6
Wireless IEEE 802.11 Channels Sets (Revision A)
Frequency Range
Channel ID
36
40
44
48
52
56
60
64
100
104
6
7
8
9
10
11
12
13
5150-5850 MHz
2437
5150-5850 MHz
5180
5200
5220
5240
5260
5280
5300
5320
*3
5500
*3
5520
2400-2483.5 MHz
2437
2442
2447
2452
*1
2457
2462
*2
2467
*2
2472
Note
US only
Note
Wireless LAN
*4
C-3