Dvd Super Multi (+-R Double Layer) Drive - Toshiba Tecra A7 User Manual

Problem
Some CD/DVDs run
correctly, but others
do not

DVD Super Multi (+-R Double Layer) drive

For more information, refer to Chapter 4,
Problem
You cannot access a
CD/DVD in the drive
User's Manual
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software
Check the CD/DVD
Check the type of DVD/CD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROMXA
Mode 2 (Form1, Form2),
Enhanced CD (CD-EXTRA), CD-G
(Audio CD only)
Recordable:CD-R, CD-RW
Check the region code on the DVD. It must match
that on the CD-RW/DVD-ROM drive. Region
codes are listed in the Optical media section in
Chapter 2, The Grand
Operating
Procedure
Make sure the drive
Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD or DVD. Make sure
there is no obstruction. Remove any foreign
object.
Check whether the DVD is dirty. If it is, wipe it
with a clean cloth dipped in water or a neutral
cleaner. See the Media care
for details on cleaning.
Troubleshooting
'
s needs.
'
s documentation.
Tour.
Basics.
'
s drawer is securely closed.
section in Chapter 4
9-10